• Damsgaard Dickson posted an update 7 months ago

    An attractive molding can be defined as any continuous projection that is used to improve the design of a wall. In ancient Greece, these were first employed to throw water from the wall. The contours, measurements, and projections of moldings vary greatly.


    One sort of molding – the frieze (or frieze board) – was first applied to the Parthenon in the Acropolis. The frieze is known as a part of the Greek architectural style.

    The Parthenon was produced for the goddess Athena. The frieze moldings that have been used were meant to tell the storyplot of her overcome Poseidon to become the patron in the ancient city that’s now Athens.

    The frieze panels really are a series of designed pediments which can be full of the pictures of Athena’s birth and rise to power. Today, a frieze board is the lcd just under a crown molding or cornice. Often, low relief is applied to this particular panel for really decoration.

    Today, frieze moldings are most typical as being a portion of an ornamental molding that follows the neoclassical architecture or decorating style.

    You want a pretty high ceiling (a minimum of 9 feet), and best if you paint or stain the frieze as well as the crown molding the identical color. The frieze is an excellent approach to visually bring the ceiling down making the room appear cozier.

    Crown Molding

    Crown molding is the most popular sort of cornice molding. Crown molding generally is a single-piece of decorative molding, installed towards the top of a wall, within an angle towards the adjoining ceiling. However, I’ve come across crown molding assemblies of 5 or even more pieces in additional elaborate settings.

    Crown molding often features a profile that projects from the ceiling and around the wall, adding an abundant appearance to some room. It is usually used towards the top of cabinets or built-in furniture.

    Introducing this type of decorative molding to some not at all hard room gives a historic character that this room wouldn’t otherwise have. Crown molding can be used in combination with other moldings to add details to fireside mantels and shelves. (For it’s worth, this is probably my personal favorite architectural feature).

    Crown molding can be a form of Cornice Molding. The term "cornice" describes molding installed across the the surface of a wall or more from the. If this therapy is produced from multiple pieces of molding, stage system a "build-up cornice." The other way of cornice molding could be the Cove Molding.

    Cove Molding

    Cove molding is quite comparable to crown molding, with similar application and function. The gap forwards and backwards is within the profile. Cove molding features a concave profile (which bows inward) while crown molding features a convex (outward) profile.

    While crown is most in the home in traditional settings, Cove moldings are equally comfortable in country, as well as contemporary settings. You never normally see multi-piece assemblies of cove moldings. You are able to occasionally find it "beaded" at bottom and top for any little accent.

    Entries, formal areas, formal dining rooms, and master bedrooms usually receive decorative moldings with ornate or traditional patterns.

    Kitchens and also other more functional areas of your home might be where you will discover the greater design of the cove molding. Over the years, coves and crowns have become smaller sized, but a majority of still bear the shapes and styles in the original Greek and Roman designers.

    Chair Rail Molding

    A chair rail is often a decorative molding that divides a wall horizontally, usually about 32" to 36" higher than the floor. They protect the walls in locations damage might occur from people arising out of chairs.

    Because of this, greater traditional chair rails will have a nosing within the center, with curved and beveled surfaces that taper returning to the wall above and underneath the nosing.

    Today, chair rails remain a typical detail in traditional interiors. They serve the decorating effect of unifying various architectural information a place, including window and door trim, and fireplace surrounds.

    Chair rail could also be used as being a cap for wainscoting and other wood paneling. This decorative molding adds a sense of detail and charm while achieving continuity within a room by unifying various decorative elements.

    Panel Molding

    Panel molding, commonly called a picture frame molding, appears like a large empty frame, and is also often a part of designs on walls of old Colonial and, Georgian, and Early American homes. The location of this molding ought to be higher than the chair rail height and about 10 to 12 inches below the ceiling.

    How big is such a decorative molding, measuring 1" to 3" in width, ought to be proportionate on the ceiling height with the room. Just like the other moldings, panel molding adds a sense of charm and delicate detail into a room.

    Wall framing appears at the Georgian duration of American architecture, when plaster begun to replace wood panels on the walls. Panel molding is yet another fantastic way to divide walls into large, eye appealing units, without the same worth of full wall paneling.

    Another using this versatile molding would be to trim openings made by wider planks which are assembled as rails and fashions. Often, the centers of those frames remain open. By making use of panel moldings around the perimeter with the opening, you create the appearance of an image frame.

    After this decorative molding is painted in the same color as the surrounding walls, you accomplish a sculptural quality to some wall, adding texture and shadows. If moldings are painted in contrasting colors, they could produce a striking 3 dimensional appearance, giving depth and dimension. Such a treatment methods are popular for staircases and entries.

    Baseboard & Base Molding

    Baseboard molding protects the base of the wall from ware and tear, while hiding openings and other irregularities in which the wall meets the ground. Base moldings provide the floor line an increased profile, and is as elaborate or simple as you desire.

    Whereas it really is easy to put in chair rail over a level plane, baseboard (like crown) can be tricky should your floors (or ceilings) are certainly not level. That is why, I propose getting a professional woodworker for that setting up these moldings.

    Together remedy to uneven floors, it is possible to use a "shoe molding" down the bottom front edge to get the baseboard a finished look. Something more important that can be done with baseboard (along with with all the toe kick of your respective cabinets) is incorporate accent lighting.

    It is not commensurate with the pure traditionalist, but it’s a reasonably nifty approach to have accent lighting across the perimeter of an room. You couldn’t try this until they made the small LED rope lights these days.

    Rope lights are available in different lengths and shades, and is easily installed behind baseboard. Only make a notch within the back side in the baseboard, at the pinnacle, and run the rope lights in the notch.

    That is more frequently utilized in commercial spaces, but may be added in entries and hallways – specifically in contemporary homes.

    Flexible Moldings

    If you have a curved wall or arch, it is possible to likely have an excellent craftsman develop a curved molding approximately 3 times the price of a straight molding. Or, you can purchase a versatile molding approximately around the same price since the straight one.

    These permit you to install moldings onto curved surfaces or arches, without the delay and expense of getting them made from wood. The stock profiles (you’ll find hundreds) are identical for the rigid versions and they are generally compatible as much as paint finish is involved.

    To read more about
    ecomoulding you can check this useful internet page.